Circutor CVM-B Series Manual do Utilizador Página 148
- Página / 320
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
(1)
The integrated variables are those that the unit has as standard.
(2)
If in the unit there is more than one module connected with the same type of inputs, the module with the lowest
number is the one with the lowest serial number.
(3)
When programming as an alarm a digital input programmed as logic state if:
- You program the maximum value = minimum value = 0 the output will show an alarm when the input has
a value of 1.
- You program the maximum value = minimum value = 1 the output will show an alarm when the input has
a value of 0.
Any other combination of values will cause erroneous behaviour of the alarm.
The pre-alarm value is not considered.
(4)
Codes valid only for programming the digital outputs of the transistor in impulse mode.
(5)
Codes not valid for programming analogue outputs.
● When programming the pre-alarm value:
If the unit exceeds the programmed pre-alarm value, the icon
is activated on the display,
and the icon that indicates the alarm status changes colour:
.
The value is programmed in %.
, ... The ten possible digits to program.
Delete character, deletes the selected character.
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter.
Next, selects the next parameter.
Conrm, conrms and saves in the memory the values programmed on the screen.
Back, returns to the home screen of the setup menu Figure 113.
Main Menu, back to the main menu, Figure 25.
Use the keys
and to select the different options.
To conrm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the minimum value below which the relay is activated:
The units and maximum and minimum values of the variables to program are shown in
Table 22.
, ... , , The ten possible digits to program.
Delete character, deletes the selected character.
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter.
Next, selects the next parameter.
148
CVM-B100 - CVM-B150
Instruction Manual
- INSTRUCTION MANUAL 1
- CONTENTS 4
- REVISION LOG 7
- CVM-B100 - CVM-B150 10
- Instruction Manual 10
- 3.3.- UNIT TERMINALS 12
- POWER SUPPLY 14
- Measurement system: 16
- Figure 11, appears on 22
- Figure 12) until the 22
- Figure 14) 23
- Figure 17 25
- 4.2.- MEASUREMENT PARAMETERS 27
- Table 6: Function of keys 28
- Figure 19): 29
- Figure 22, which shows the 31
- Figure 25:Main screen 36
- Figure 27 39
- Figure 28 42
- Figure 31): 42
- Figure 33 44
- Figure 31 44
- Figure 37 48
- Figure 36 48
- Figure 38 49
- Figure 40 52
- Figure 42 53
- Figure 43 54
- screen 61
- Figure 50 64
- Figure 53 68
- Figure 57 71
- Figure 56 71
- Figure 58 72
- Figure 60): 74
- Figure 62 76
- Figure 60 76
- Figure 65 80
- Figure 68 84
- Figure 72 88
- Figure 71 88
- Figure 73 89
- Figure 71 89
- Figure 77 93
- Figure 75 93
- Figure 80) 96
- Figure 81) 97
- Figure 82: Harmonics screen 98
- Table 20:Harmonics 98
- Figure 26 100
- Figure 25 100
- Figure 86, where you 101
- Figure 85 102
- Table 21 104
- Figure 89 106
- Figure 91 108
- Figure 93, has 4 columns: 108
- Figure 95 111
- Figure 98 116
- Figure 102, with 116
- Figure 111 124
- Figure 120 133
- Figure 123: 137
- Figure 125: 140
- Figure 126: The C0 141
- Figure 127: The C0 143
- Figure 128 144
- Figure 113 144
- L1 L2 L3 III 146
- Figure 133 161
- Figure 137 167
- Table 23 177
- Table 50: 196
- “6.5.- PICS MAP”) 205
- 6.5.- PICS MAP 206
- Figure 142 210
- Figure 143 210
- Figure 144 210
- Protective cover 211
- 1 2 3 4 5 6 7 8 9 10 214
- External power 214
- Figure 154 215
- Figure 155 216
- Optocoupler 228
- Figure 163 229
- Figure 164 230
- 150Ω 150Ω 245
- Figure 171 246
- Figure 172 247
- Figure 181 261
- Figure 182 261
- Figure 189 269
- Figure 190 270
- Figure 191 270
- 7.6.5.- LIST OF LONWORKS LOGS 272
- 7.7.3.- CONNECTION DIAGRAM 281
- Figure 196 282
- Figure 136 284
- Module 2 285
- Module 3 286
- Module 4 286
- Module 5 287
- Module 8 287
- Module 9 288
- Module 13 289
- Figure 201 291
- 7.9.3.- CONNECTION DIAGRAM 297
- Figure 207 298
- Figure 208 301
- 9.- TECHNICAL FEATURES 305
- 10.7.- MBUS COMMUNICATIONS 315
- 13.- CE CERTIFICATE 319
- CIRCUTOR, SA 320
- Vial Sant Jordi, s/n 320
Manuais e produtos relacionados com Instrumentos de medida Circutor CVM-B Series
(2 páginas)
(2 páginas)
(2 páginas)
(22 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.030 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais