Circutor CVM-C10 Series Manual do Utilizador descarregar pdf (Página 49)

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

Press key to access the next programming step.

Table 12: Parameter codes used to program the outputs�

Parameter Phase Code Phase Code Phase Code Phase Code

Phase-Neutral Voltage L1 01 L2 09 L3 17 - -

Current L1 02 L2 10 L3 18 - -

Active power L1 03 L2 11 L3 19 III 25

Inductive Reactive Power L1 04 L2 12 L3 20 III 26

Capacitive Reactive Power L1 05 L2 13 L3 21 III 27

Apparent power L1 06 L2 14 L3 22 III 28

Power factor L1 07 L2 15 L3 23 III 29

Cosine φ L1 08 L2 16 L3 24 III 30

% THD V L1 36 L2 37 L3 38 - -

% THD A L1 39 L2 40 L3 41 - -

Phase-Phase Voltage L1/2 32 L2/3 33 L3/1 34 - -

Frequency - 31 - - - - - -

Neutral current - 35 - - - - - -

Maximum current demand L1 45 L2 46 L3 47 III 44

Active Power Maximum

Demand

- - - - - - III 42

Apparent Power Maximum

Demand

- - - - - - III 43

In addition, there are some parameters (Table 13) that refer to the three phases at the same

time (OR function). If you have selected one of these variables, the alarm will be activated when

any of the three phases meets the programmed conditions.

Table 13:Multiple parameter codes for alarm programming�

Types of parameters Code

Phase-Neutral Voltage 200

Current 201

Active power 202

Inductive Reactive Power 203

Capacitive Reactive Power 204

Power factor 205

Phase-Phase Voltage 206

% THD V 207

% THD A 208

Apparent Power 209

Instruction Manual

CVM-C10

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 81 82

Comentários a estes Manuais

Sem comentários

Circutor CVM-C10 Series Manual do Utilizador Página 49

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Circutor CVM-C10 Series