Circutor OPTIM P&P Series Manual do Utilizador descarregar pdf (Página 7)

When unloading and moving the unit, use a forklift with forks long enough to support the entire

length of the base. Otherwise, the forks should be long enough to support at least ¾ of said

depth. The forks must be at and supported rmly by the base. Raise the cabinet by placing the

forks underneath the prole that supports the unit. (Figure 2).

There might be an offset in the centre of gravity from the centre of the cabinet,

as a result of the uneven distribution of loads inside the unit. The necessary

precautions must be taken to prevent the unit from tipping over during abrupt

operations.

Figure 2: Unloading with a forklift.

1.3.- STORAGE

The following storage recommendations must be followed for the hybrid capacitor banks:

 Avoid placing them on uneven surfaces.

 Do not store them in outdoor areas, humid areas or areas exposed to splashing

water.

 Avoid hot spots (maximum ambient temperature: 40 ºC)

 Avoid salty and corrosive environments.

 Avoid storing the units in areas where a lot of dust is generated or where the risk of

chemical or other types of contamination is present.

 Do not place any weight on top of the unit cabinets.

Instruction Manual

OPTIM P&P Series

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Sem comentários

Circutor OPTIM P&P Series Manual do Utilizador Página 7