Circutor computer SMART Series (Available until stock) Manual do Utilizador descarregar pdf (Página 16)

M98235701-03-12A

Computer Smart 6/Computer Smart 12

- 15 -

5.3 Measurement Screens

In the normal state, the regulator measures different parameters, which can be displayed on different

screens. The device also acquires the maximum and minimum values of the said parameters and displays

them after the last reset, even after the unit is turned off and restarted.

All measurement screens show the capacitors that are connected at that moment, the flashing backlight and

the alarm icon. Most screens also display the alarm code.

The unit's measurement screens are as follows (in order):

Default screen: Cos III, phase-phase voltage III and current (PM1; TypeM1):

The following data is displayed:

 Three-phase cosine and its type ( inductive or capacitive).

 Three-phase phase-phase voltage.

 Current.

The EXPORT word under the icon that shows the type of cosine indicates

that the power measured is exported. When the installation is consuming

(importing) power, the PHASE parameter must be reconfigured in the

setup menu.

Three-Phase Power Screen (PM2; TypeM1):

The following data is displayed:

 Three-phase active power (in kW).

 Three-phase reactive power and its type ( inductive, or

capacitive) (in kvar).

 Apparent power (in kVA).

Phase-neutral voltage screen (PM3; TypeM1):

The following data is displayed:

 L1 Phase-neutral voltage, with respect to the neutral (in V).

 L2 Phase-neutral voltage, with respect to the neutral (in V).

 L3 Phase-neutral voltage, with respect to the neutral (in V).

 Frequency (in Hz).

Phase-Phase Voltage Screen (PM4; TypeM1):

The following data is displayed:

 Phase-phase voltage of L1-L2 (in V).

 Phase-phase voltage of L2-L3 (in V).

 Phase-phase voltage of L3-L1 (in V).

 Frequency (in Hz).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

Sem comentários

Circutor computer SMART Series (Available until stock) Manual do Utilizador Página 16