Circutor CVMk2 Series Manual do Utilizador descarregar pdf (Página 35)

CVM

CONFIGURATION

4.4 TARIFFS

CVMk2 permits conguring up to 9 tariff. To access the tariff conguration screen, position the

cursor over Tariff and press SET.

Parameters that can be congured on this screen follow:

• No. of Tariff.: The number of tariff. Specify how many different tariff are going to be

congured.

• Synch.: Use the internal clock or calendar to manage tariff, select the CLOCK option. To

use an external signal to change tariff (activating static inputs for a CVMk2

expansion card), select the EXTERNAL option.

It is possible to load a yearly fee calendar to the memory. This calendar can only be saved from

the CIRCUTOR POWER STUDIO SCADA software. The calendar is stored in the memory and

is synchronised with the internal clock.

• No. In.: If EXTERNAL was selected in the previous option, Synch., specify the input for

the expansion card, which will receive the impulse for each one of the tariff

Since the CVMk2 expansion cards can be inserted in different positions, four digits have been

reserved to congure the inputs. The digits that occupy the most memory indicate the position

in which the inputs card is inserted in the CVMk2 measurement module.

The last digits correspond to the input number to be programmed for tariff 2.

WARNING: CVMk2 has an internal clock that you have to congure. The

device will work with this local hour but, if you communicate the device with

Power Studio the local time of the device will be changed to UTC hour.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 151 152

Sem comentários

Circutor CVMk2 Series Manual do Utilizador Página 35