Circutor CVMk2 Series Manual do Utilizador descarregar pdf (Página 80)

CVM

CONFIGURATION

Password: Enter the system password in order to make the changes (by default 1234).

The new password should be a four digit number between 0001 and 9999.

New: Enter the new system password. The password should be a four digit

number between 0001 and 9999.

Repeat: Enter the password again to conrm it.

To store the modied parameters in memory, press SET and conrm with OK (F4). To exit without

saving changes press ESC (F3).

5.2. TOOLS

5.2.1 DEVICE

To change the configuration parameters for communication between the screen and the

connected module(s), choose the system option on menu. In system, access the tools drop

down menu and select device.

WARNING: Changing the screen's communication speed can cause

communication to be lost with the module(s) that are not connected to the

screen at the time the change is made.

WARNING: Changing the password disables the screen, thus not blocking

access to the system conguration menus.

To modify the current values, press EDIT (F4). The cursor will be positioned in the rst line of

parameters. Use the up-down arrow buttons to move the cursor to the desired parameter. Press

SET to enter edit mode for the desired value.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 151 152

Sem comentários

Circutor CVMk2 Series Manual do Utilizador Página 80