Circutor computer PLUS-TF Series Manual do Utilizador descarregar pdf (Página 45)

7.3.12 Adjusting Communication Settings

This option is used to adjust the communications parameters of channel COM1, in order to integrate

Computer plus in a network with “Power Studio Scada”. The CPC NET channel controls the capacitors

through the CPC3i-xRS card and it can not be configured.

To adjust channel COM 1 proceed as follows:

 Open the setup menu by following the procedure described in section 7.3.2.

 Select the Communications (Fig.64) option and press OK . The screen on Fig.65 will be displayed.

 Press Edit to adjust the desired parameter values.

Fig. 64.- Communications Adjustment Menu

Fig. 65.- Edit Communications Adjustment Menu

 The following parameters can be configured:

Perip … Adjustment of the peripheral number when Computer plus is in a network of instruments

connected to “Power Studio Scada”. Adjustable between 001 and 255

Baud…This option adjusts the communication speed (Baud rate). The options are: 9600, 19200,

38400 and 57600

Parity Adjusts the parity. The options are: None, Even, Odd

Bits… Adjusts the number of bits and Stop bits. The options are: 8bits , 1stop or 8bits , 2stop

 To edit a field, follow the procedure described in section 5.4.

7.3.13 Adjusting Clear / Update

This option can be used to delete the maximum or minimum records and enter the device's reprogramming

system.

 Open the setup menu by following the procedure described in section 7.3.2.

 Select the Clear / Update (Fig.66) option and press OK . The screen on Fig.67 will be displayed.

 Press Edit to adjust the desired parameter values.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 68 69

Sem comentários

Circutor computer PLUS-TF Series Manual do Utilizador Página 45