Circutor computer PLUS-TF Series Manual do Utilizador descarregar pdf (Página 47)

8.2 Measurable parameters

 The options available and measurable parameters are summarised on table 8.1.

 Each option can be selected with two different ways:

A) Search the specific parameter and press OK

B) Moving onto the next or previous screen with the browsing arrows.

Options

Display

Parameters displayed on the screen

Power, cos , FPIII

Fig. 70

Displays the three-phase active, power factor and apparent power and the cos  and

three-phase PF

Status III

Fig. 71

Shows the number of steps connected, kvarC III connected and the frequency of supply

Status

Fig. 72

Shows the kvarC connected to each phase

cos 

Fig. 73

Shows the cos  of each phase and the cos  III

Fig. 74

Shows the PF of each phase and PF III

V phase-phase

Fig. 75

Shows the phase - phase voltages of the installation

V phase-neutral

Fig. 76

Shows the phase - neutral voltages of the installation

I line

Fig. 77

Shows the line current of each phase

I neutral

Fig. 78

Shows the installation's neutral current (parameter calculated, not measured)

I Cond

Fig. 79

Shows the current of each phase of the capacitor bank

I leak, I N Cond

Fig. 80

Shows the leakage current (measured) and the neutral current (calculated) of the

capacitor bank.

Power III

Fig. 81

Shows the three-phase active, reactive and apparent power

Fig. 82

Shows the active power of each phase

kvar

Fig. 83

Shows the power factor of each phase

kVA

Fig. 84

Shows the apparent power of each phase

Temperature

Fig. 85

Shows the temperature inside the Computer. This temperature is usually 10ºC above the

temperature in the cabinet's environment.

Imported Energy III

Fig. 86

Shows the energies in kWh, kvarL and kvarCh, imported since the last meter reset.

Exported Energy III

Fig. 87

Shows the energies in kWh, kvarL and kvarCh, exported since the last meter reset.

(*) Only in Computer plus TF-CDI

Table 8.1.- Options of the measurement menu and data measured

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 68 69

Comentários a estes Manuais

Sem comentários

Circutor computer PLUS-TF Series Manual do Utilizador Página 47

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Circutor computer PLUS-TF Series