Circutor computer SMART III-Fast Series Manual do Utilizador Página 31

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 108
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 30
4�4�1� STATUS OF THE CAPACITORS
Figure 13: Status of the capacitors�
Thisareashowsthestatusoftherelays(stages)oftheunit,andthusofthecapacitorscon-
nectedtoit�
Thepossiblestatesare:
NothingisdisplayedifthestageisnotconnectedandconguredasAUTO�
The iconisdisplayedifthestageisconnectedandconguredasAUTO
The iconisdisplayedwiththebottomstaticbarifthestageisconnectedandcon-
guredasOn
The iconisdisplayedwiththebottombarblinkingifthestageisconnectedand
conguredasOn NC
Onlythestaticbottombarisdisplayedifthestageisdisconnectedandconfiguredas
OFF
Onlytheblinkingbottombarisdisplayedifthestageiscancelledbytheleakagecur-
rentalarmE15
Inthesetupmenu(5�12�- STATUS OF THE STAGES)thestatusofthestagesisselectedfrom
thefollowingoptions:
AUTO:Thestatusofthestagedependsontheoperationperformedbytheunit�
On:StageforcedtoON,alwaysconnected�
OFF:StageforcedtoOFF,alwaysdisconnected�
On NC:StageforcedtoON,alwaysconnectedbutthesystemdoesnottakeinto
accountitsconnectedpower
Bydefault,allthestagesareconfiguredasAUTO
4�4�2� STATUS OF THE UNIT
Thisareadisplaysthestatusoftheunitinaccordancewiththefollowingicons:
Theunitisinmeasurementandregulationmode�
Theunitdoesnotmeasureorregulate�
Indicatesthatyouareinthesetupmenu�
Indicatesthatyouareinthetestmenu�
Indicatesthat,withinthesetupmenu,youareineditingmode�
Indicatesthatyouareviewingtheinstantaneousvalue�
Indicatesthatyouareviewingthemaximumvalue�
Indicatesthatyouareviewingtheminimumvalue�
31
Instruction Manual
Computer SMART III FAST
Vista de página 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 107 108

Comentários a estes Manuais

Sem comentários